Plastic hot tub

These hot tubs have plastic inserts that are made out of a high-quality polypropylene, which is used to make outdoor pools. It is resistant to cold weather, UV rays and other environmental conditions. Plastic hot tubs are more hygienic than wooden hot tubs as you can drain the water of a tub each time after using it, while still maintaining the same natural wooden hot tub look from the outside.

Environmentally

friendly

Artisan

woodcraft

Made to last

From: 1731€

Description:

Wooden paneling: Spruce, Thermowood

Standard set:

  • Plastic insert with outer wooden paneling.
  • Plastic benches inside.
  • Impregnated outer walls in a chosen color (color palette offered by us).
  • Internal or external stainless steel heater (grade 304 or grade 316).
  • Wooden fence protection (for internal heater).
  • 2-meter chimney.
  • 2 pcs. stainless steel tightening bands.
  • Decorative wooden cornice.
  • Two-piece wooden cover for hot tub.
  • Matching wooden stairs.
  • Ash scoop (only for internal heater).
  • Water stirring paddle.
  • Metal bar for drinks.
  • Water thermometer.
  • Water drain.

Plastic insert colors:

  • White – RAL 9010
  • Grey – RAL 7032
  • Anthracite – RAL 7011
  • Blue – RAL 5012
  • Black – RAL 9005

Hot Tub accessories/upgrades:

  • Air Bubble System (12 jets).
  • Hydro Massage system (8 jets).
  • LED Lighting.
  • Plastic cornice.
  • Faux leather insulated cover.
  • Walls and bottom insulation.
  • Sand filtration system with big wooden cover box.
  • Metal fence on the chimney (protection against burns).

Size options and capacity with internal wood-fired heater:

CAPACITY (PEOPLE)INNER DIAMETER (CM)WATER VOLUME (LTR)SPRUCE WEIGHT (KG)
2-41601800200
4-61802290220
6-82002830240
8-102203420260

 

Size options and capacity with external wood-fired heater:

CAPACITY (PEOPLE)INNER DIAMETER (CM)WATER VOLUME (LTR)SPRUCE WEIGHT (KG)
4-61601800180
6-81802290200
8-102002830220
10-122203420240

 

Please note:

*Each product is individually designed, handmade, and manufactured according to a specific purchase order and may not 100% correspond to the photos on our website.

**You will be responsible for arranging lifting facilities at your point of delivery.

What is a difference between internal and external wood-fired hot tub heaters?

Internal wood fired heater:

Internal heater offers a faster heating time than an external wood-fired stove as there is almost zero heat escape. The internal stove consumes around 25% of the tub’s space, however, a 180cm wooden hot tub can still accommodate up to 6 people. An internal heater offers more coziness as you can sit close to the fire, however, there are also a few disadvantages – internal heaters can be dangerous for children, and it takes more time to clean them too.

Important!

It’s strictly forbidden to start the heating before the hot tub is not filled with water.
Only when the internal stove is completely under water it is allowed to start the heating. Otherwise the stove will get damaged.

External wood fired heater:

An external wood-fired heater offers more space in the hot tub, also it is more child friendly, as the stove will be installed outside the Hot tub. However, you will need more space to set it up. It will take less time to clean inside the tub, and it is also easier to remove ashes from the external heater without contaminating the water. Hot tub heating time will be slightly longer (an extra 30 min. as compared with an internal heater). External heaters are also slightly more expensive, moreover you will need to make sure the heater is drained if you are expecting freezing temperatures.

Important!

It’s strictly forbidden to start the heating before the hot tub is not filled with water.
Only when the top circulation pipe inlet of the external stove gets completely under the water it is allowed to start the heating. Otherwise, the stove will get damaged.

Stainless steel grades:

Grade 304. Stainless steel is non-magnetic. In general, this grade is more resistant to various solutions, but wood treatments affecting water’s pH should be avoided. Small amount of chlorine can be used with this type of metal (available for additional charge).

Grade 316. Non-magnetic stainless steel. This stainless steel has the best corrosion-resistant properties and is chlorine friendly (available for an additional charge).

Air Bubble System

An air bubble system has 12 jets and is the perfect upgrade if you are looking to get the maximum benefit of your hot tub. Air bubbles will relax and soothe your muscles, as well as keep the water rotating and moving around your body.

Hydro Massage system

Hydro massage is the use of water pressure to apply massage techniques to your body. We add 8 jets fitted to the side of the tub so you can find one that hits the right spot. The difference between the air bubble system and the massage system is that a hydro jet shoots a water stream while a bubble jet uses a stream of air.

LED Lighting

LED lighting will allow you to set the mood and enjoy your relaxing background! Use them to guide your guests to the hot tub, or just for a colorful aesthetic addition.

From: 1731€

“Edjusta - supplying products to Europe for over 13 years”

Please do not hesitate to contact us if you wish to create a perfect Plastic hot tub for you and your family. We are always here to help.